Harsh sun reflections, seasonal temperature swings, and outdoor moisture can quickly destroy a standard indoor bracket. Standard powder coats peel away after a few rainy afternoons, leaving rusted joints that seize up and lock your screen in place. Heavy exterior winds and shifting viewing angles demand rugged hardware that keeps an outdoor panel anchored without drifting off-level. Finding the best tv mounts for outdoor patios means matching corrosion-resistant finishes with flexible articulating arms to tackle afternoon glare across your deck or gazebo. Investing in an exterior-rated bracket gives you the freedom to fine-tune angles for casual gatherings or dedicated outdoor sports viewing setups without risking structural failure.
Exterior installations often involve mounting against tough exterior siding, brick, or gazebo posts where precision matters. Stainless steel hardware and electroplated coatings prevent unsightly rust streaks from staining your patio walls over time. Dual articulating arms offer the strength needed to hold larger displays securely while providing extended reach away from structural columns. Verified load ratings and expansive VESA patterns ensure your exterior setup stays locked in place, even when coastal humidity or summer heat waves roll through your backyard entertainment space.
Pros
- Weatherproof coating and stainless steel hardware provide excellent corrosion resistance for outdoor environments.
- Full motion design (swivel, tilt, extension) offers flexible viewing angles for different seating areas.
- Sturdy steel build supports up to 110 lbs, suitable for most mid-size to large TVs.
- Compatible with a wide range of VESA patterns (200x200 to 600x400mm), ensuring broad TV compatibility.
- Lifetime warranty and responsive U.S.-based customer support add long-term value.
Cons
- Weight capacity of 110 lbs may not support larger, heavier TVs; check TV weight before purchase.
- Installation may require two people and a stud finder; professional help recommended for masonry or brick walls.
- The mount extends up to 20 inches, which might not be enough for very deep corner placements without additional clearance.
If you are a homeowner looking to bring your TV outdoors for movie nights, sports games, or casual streaming on the patio, the Mount-It! Weatherproof Outdoor TV Mount is a practical solution worth considering. Unlike standard indoor mounts, this bracket is engineered specifically for exterior use, with anti-corrosion coatings and stainless steel hardware that resist rain, humidity, and salt air. Built to pass a 90-hour salt spray test, it promises to stay rust-free even in coastal climates or during heavy storms.
This mount is best suited for outdoor entertainment enthusiasts, families with covered patios or gazebos, and anyone who wants to enjoy TV while barbecuing or relaxing outside. It fits most 37-80 inch TVs with VESA patterns up to 600x400mm, supporting up to 110 lbs. That covers a wide range of popular 4K and even some larger QLED models, though you should always confirm your TV’s weight to stay within limits. The heavy-duty steel construction gives confidence that your investment is secure, and the full motion design lets you swivel up to 60 degrees left or right and tilt for glare reduction, so you can get a clear view from multiple seating areas.
In terms of build quality, the mount features a tough black powder coating that resists peeling and fading. The included stainless steel bolts and washers add extra resistance to corrosion. Installation is straightforward if you have basic tools and a stud finder, though mounting on brick or stucco may require masonry anchors (not included). The mount comes with a level and clear instructions. Once installed, the dual arms keep the TV close to the wall when not in use, or you can pull it up to 20 inches away for better positioning. Cable management is not built-in, but you can easily add zip ties or a weatherproof cover for a clean look.
Realistically, there are a few limitations. The 110-pound limit means if you have a massive 80-inch TV that weighs more, this mount won’t work. Also, while the tilt helps with glare, direct sunlight can still wash out the picture on any TV, so consider adding a shade or placing the mount under a covered structure. The mount does not include a built-in level or bubble indicator on the wall plate, so you’ll need to use the included separate level during installation. Some users might find the arms a bit stiff when adjusting, but that’s typical for heavy-duty models to prevent sagging over time.
For outdoor entertainment buyers, this mount offers a solid balance of durability, adjustability, and value. It pairs well with a weatherproof TV cover or an outdoor-rated TV for maximum longevity. The lifetime warranty and responsive support from Mount-It! (based in San Diego) add reassurance. If you want to enjoy Super Bowl parties, binge-watching shows, or casual outdoor movies without worrying about your mount rusting, the Mount-It! is a reliable choice.
The Mount-It! outdoor mount uses multiple layers of protection to resist the elements. The steel arms undergo electroplating before receiving an outdoor-rated powder coating, which prevents chipping and corrosion. All screws, bolts, and washers are stainless steel, chosen for their resistance to rust in humid or salty environments. The mount passed a 90-hour salt spray test, a standard measure for outdoor equipment durability. This means you can install it on a patio, gazebo, or even near a pool without worrying about premature deterioration.
Installing the Mount-It! outdoor mount is a DIY-friendly project for those comfortable with basic tools. You will need a stud finder, drill, socket wrench, and a level (included). First, locate solid wood studs in your wall or support beams in your ceiling or post. The included template helps mark pilot holes. Use the provided lag bolts for wood surfaces; for concrete or brick, use appropriate masonry anchors (not included). Attach the wall plate securely, then mount the TV to the VESA brackets on the arms. With two people, lift the TV onto the wall plate and lock it in place. The full motion arms allow adjustment after installation. Always double-check that all bolts are tight and the mount is level before letting go of the TV.
Frequently Asked Questions
Can standard indoor TV wall mounts be installed on an outdoor patio?
No, standard indoor TV brackets lack the specialized anti-corrosion coatings and weatherized hardware needed to survive outdoor exposure. Moisture, humidity, and rain cause untreated steel to oxidize quickly, seizing pivot joints and weakening structural bolts. The best tv mounts for outdoor patios utilize electroplated finishes, heavy powder coatings, and stainless steel fasteners tested to withstand moisture and salt spray.
How much weight can the Mount-It! Outdoor TV Mount Weatherproof hold safely?
The Mount-It! Outdoor TV Mount Weatherproof safely supports televisions weighing up to 110 lbs. Dual heavy-duty steel articulating arms distribute this load evenly to minimize arm deflection when extended up to 20 inches from the wall. This certified limit easily accommodates most mid-size to massive 37 to 80-inch outdoor displays.
What VESA patterns work with this outdoor patio TV bracket?
This outdoor mounting bracket supports VESA patterns ranging from 200×200 mm up to 600×400 mm. Supported configurations include 300×200, 300×300, 400×200, 400×300, 400×400, and 600×400 mm horizontal and vertical hole spacings. Verifying your screen rear bolt pattern before bolting the brackets ensures complete alignment without blocking recessed input ports.
Can you mount this outdoor bracket to exterior brick or concrete fireplace structures?
Yes, this heavy-duty mount attaches securely to solid concrete walls, stone pillars, and masonry brick using appropriate masonry anchors. Patio installs frequently require anchoring above an outdoor hearth, much like indoor fireplace TV mounting options. Always drive anchors directly into solid brick face rather than crumbly mortar lines to maintain maximum pull-out holding strength.
How do you reduce daylight glare on an outdoor patio TV?
Utilizing full-motion tilt and swivel adjustments lets you angle the screen away from direct sunlight and overhead ambient patio lights. This outdoor bracket delivers up to 60 degrees of left and right swivel alongside smooth downward tilt mechanics. Swiveling the display toward shaded lounge seating restores vibrant picture contrast during bright afternoon gatherings.
Does this outdoor patio mount fit wide framing studs?
This wall bracket is primarily engineered for standard 16-inch framing configurations or solid masonry walls. Homeowners dealing with wider structural posts or specialized 24-inch framework should evaluate dedicated mounting brackets for 24-inch studs or install an exterior-grade backing plate. Proper anchoring across structural wood or masonry ensures complete peace of mind during windy outdoor weather.
Write Your Review
No reviews yet. Be the first to share your experience!